XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Pry out the yellow locking sleeve slightly (use a screwdriver).
Lift the gear selector cable off the gear selector assembly.
Remove the gear selector cable from the steering column
Disconnect the clip from the bracket located by the steering column. Also disconnect the clip located by the climate control system.
Installation
Install the transmission cable
Note: Start installation from the ignition switch.
Route the gear selector cable down along the steering wheel bracket and under the climate control unit.
Secure the gear selector cable in its clips at the bracket and climate control unit.
Press the end of the gear selector cable into place in the ignition switch. Ensure that the locking tabs for the gear selector cable are engaged and
locked.
Connect the gear selector cable to the mounting for the gear selector assembly