Volvo Workshop Service and Repair Manuals

Installation

Installing the sealing ring for the CV joint housing on the stub axle

Note! Replace the sealing ring if it is damaged or worn.

Clean around the constant velocity joint before installing the sealing ring.
Carefully install the sealing ring. Ensure that the sealing ring is correctly positioned on the drive shaft.

Finishing

Install the right-hand drive shaft. See: Drive shaft right, replacing, TF-80SC AWD, B6324S, TF-80SC, B6324S, TF-80SC AWD See: Axle Shaft
Assembly/Service and Repair/Drive Shaft Right, Replacing. Install the left-hand drive shaft. See: Drive shaft left, replacing, TF-80SC AWD, B6324S,
TF-80SC, B6324S, TF-80SC AWD See: Axle Shaft Assembly/Service and Repair/Drive Shaft Left, Replacing.