XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Installing the sealing ring
Install sleeve 7087-1 in the end of the shaft. Lubricate the lip of the new sealing ring. Use grease 116 1241-3 (80g). Position the seal on the sleeve.
Knock the seal into the bevel gear. Use drift 999 7087 Drift See: Tools and Equipment/999 7087 Drift together with spacer ring 7086-1. Ensure that the
tool goes towards the bevel gear housing. Check that sleeve 7087-1 is removed with the tool.
Finishing
Installing the bevel gear
Install the bevel gear. See See: Service and Repair
Filling with oil
Top up with new oil. See Replacing the pinion seal for the bevel gear See: Automatic Transmission/Transaxle/Seals and Gaskets/Service and
Repair/Replacing the Pinion Seal for the Bevel Gear.