XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)
Cable routing on the left-hand side of the bumper
Press up the tabs on the plates and insert the cable in the holes drilled earlier. Position the cable as illustrated
Route the cable to the right-hand side of the existing cable duct as before.
Cable routing on the right-hand side of the bumper
Press up the tab on the plate. Insert the cable in the previously drilled hole. Position the cable as illustrated.
Applies to all models
Press the large cable harness for the sensors into place in the existing cable duct (1) in the bottom of the rear section.