Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)

Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Braking Sensor/Switch > Component Information > Service and Repair > Pedal Position Sensor, Replacing > Page 1729

Page 3
background image

Note! Check that the snap ring is in position in the groove. Check that the ends of the snap ring lie against the stop lug.

Install:

-

The O-ring on the sensor

-

lubricate the O-ring lightly using a soap solution

-

the sensor for the power brake booster so that the locking lug goes into position.

Gently pull the sensor. Check that the sensor is secure.
Check that the snap ring is in position.
Connect the connector to the sensor.

Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Braking Sensor/Switch > Component Information > Service and Repair > Pedal Position Sensor, Replacing > Page 1729

[PREV PAGE] [NEXT PAGE]