XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)
Replacing sensor cable, left-hand side
the screws (1) and then the inlet hose
the hose clamp (2)
the connector (3)
the cable tie for the cable
remove the turbocharger (TC) control valve from the air cleaner (ACL) housing
the plastic nut on the wheel arch side
the air cleaner (AC L) housing.
Replacing sensor cable, left-hand side, contd.
Insert a hand under the fuse box. Disconnect the cable from the clips on the brake cable.
Pull up the sensor until the connector for the new cable is up.
Remove the tape and connect the connector. Install the cable in the clips on the brake cable.