Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)

Sensors and Switches > Sensors and Switches - HVAC > Refrigerant Pressure Sensor / Switch, HVAC > Component Information > Locations > Page 1951

Page 2
background image

-

the connector

-

the pressure sensor.

Installation

Installing the pressure sensor

Install:

-

the pressure sensor. 

-

the connector.

Finishing

Filling with coolant and leak tracing

Vacuum pump the air conditioning (A/C) system. See: Vacuum pumping See: Heating and Air Conditioning/Service and Repair/Vacuum Pumping.
Fill the system. See: Refrigerant, filling See: Heating and Air Conditioning/Service and Repair/Refrigerant, Filling.
Leak trace the system. See: Leak tracing, fluorescent tracing agent / UV lamp See: Heating and Air Conditioning/Testing and Inspection/Component
Tests and General Diagnostics/Leak Tracing, Fluorescent Tracing Agent/UV Lamp or: Leak tracing, electronic leak tracer See: Heating and Air
Conditioning/Testing and Inspection/Component Tests and General Diagnostics/Leak Tracing, Electronic Leak Tracer.

Installing the skid plate

Note! For tightening torques, see: See: Body and Frame/Specifications

Move the protective plate up in the bumper cover.
Press forward until the mounting brackets enter the subframe.
Install and tighten the 6 x M10 screws crosswise.

Sensors and Switches > Sensors and Switches - HVAC > Refrigerant Pressure Sensor / Switch, HVAC > Component Information > Locations > Page 1951

[PREV PAGE] [NEXT PAGE]