Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)

Sensors and Switches > Sensors and Switches - Lighting and Horns > Backup Lamp Switch > Component Information > Testing and Inspection > Page 2029

Page 3
background image

Installing connectors

Install the connector with cables on the back-up lamp switch.
Install a tie-strap as illustrated so that the cable harness is not in contact with the gear selector cable.

Install the bracket on the gearbox using the 3 M8 screws. Tighten.

Finishing

Installing the gear selector cables

Install the air cleaner (ACL) housing and the gear selector cables. See Gearbox cables, replacing .

Sensors and Switches > Sensors and Switches - Lighting and Horns > Backup Lamp Switch > Component Information > Testing and Inspection > Page 2029

[PREV PAGE] [NEXT PAGE]