XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)
-
Press the wiper arm into place on the shaft journal
-
Screw the nut into place loosely
-
Adjust the wiper arm to the correct position. See the illustration. The distance from the center of the wiper blade to the upper edge of the trim strip
must be 50 mm
-
Tighten the nut. Tighten to 20 Nm
-
Install the protective cover over the nut.
Note! Remove the masking tape from the wiper arms and the edge of the hood.
Windshield wiper blades
In reverse order.
Other information
To adjust the control arms. See See: Wiper Arm/Adjustments
