XC90 AWD L6-3.2L VIN 98 B6324S (2007)
-
Turn the ignition key to position 0.
-
Install the trailer connector (1). Use the three screws (2) and the nuts (3). Tighten.
-
Route the cable harness behind the screw (4) on top of the tow bar. Then route the cable harness down past the bracket (5).
-
Clamp the cable harness at the bracket. Tighten the clamps (6).
Installing the connector for fixed tow bars
Applies to the S60
-
Install the trailer connector (1). Use the three screws (2) and the nuts (3). Tighten.
-
Leave the bracket hanging down as illustrated
-
Secure the cable harness at the tow bar member with a tie strap (4) on both sides of the tow bar.
-
Position the tie straps according to the listed dimensions.
-
Do not tighten the clamps fully yet.
Illustration A applies to the V70
Illustration B applies to the S80
