XC90 AWD L6-3.2L VIN 98 B6324S (2007)
Remove the bracket for the heated oxygen sensor (HO2S) from the sub-frame (does not apply to diesel cars).
Remove the heated oxygen sensor (HO2S) wiring from the right hand side of the sub-frame (applies only to 6-cylinder engines only, not diesels).
Lower the sub-frame a further 40 mm.
Pressing out the bushings
Install the hydraulic tool and press sleeve as illustrated.
Press the bushings out of the subframe, see the following illustration.
Note! Use any of tools 999 5575, 999 5576 and 951 2564.
Marking for the bushing on the sub-frame
Clean the hole for the bushing in the sub-frame.