XC90 AWD L6-3.2L VIN 98 B6324S (2007)
-
Drill a hole with a - 5 mm (3/16 ") diameter drill bit for the screw for securing the front engine block heater socket's mounting plate.
-
Secure the front engine block heater socket with a screw and nut in the drilled hole and tighten.
-
Secure the tie strap in the hole around the front engine block heater socket's cable.
-
Fold in the connector so that the cable adopts the correct length in the tie strap before it is tightened.
-
Tighten the tie strap.