XC90 AWD L6-3.2L VIN 98 B6324S (2007)
Remove the lower tail lamp. See Removing the lower tail lamp.
-
Slacken off the 2 screws
-
Remove the tail lamp.
Installation
Installing the upper tail lamp
Align the tail lamp.
Install the 2 screws.
Note! For tightening torques, see Specifications See: Specifications/Mechanical Specifications/Starting and Charging.
Installing the lower tail lamp
Install:
-
the bulb
-
the bulb holder. Press the tail lamp into place
-
the 2 nuts. Tighten.
Finishing work
Test the function.
Install:
-
the hatch in the rear side panel
-
the corner section in the floor
-
the floor hatch in the cargo compartment.