XC90 AWD L6-3.2L VIN 98 B6324S (2007)
Insert the jimmy between the brake pads (as a counterhold) to keep the piston in.
Open the bleed nipple, approximately one turn.
Pressurize the braking system using the bleeding unit
Leave the bleed nipple open until the new brake fluid enters.
Close the nipple. Remove the hose.
Reinstall the protective cap on the bleed nipple.
Remove the jimmy between the brake pads.
Install the brake caliper
See See: Brakes and Traction Control/Disc Brake System/Brake Caliper/Service and Repair/Brake Calipers Rear, Replacing
Remove the bleeding unit
See Remove the bleeding unit.
Finishing work
See Finishing work.