XC90 AWD L6-3.2L VIN 98 B6324S (2007)
Order software for the driver door module (DDM). See: Testing and Inspection/Programming and Relearning/Software Downloading
Initialize the window position in the communication input.
Integrated Relay/Fusebox Cargo Compartment/Rear Electronic Module (REM), Replacing
Relay/fuse box cargo compartment/Rear electronic module (REM), replacing
Note! As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information in the illustrations is always correct.
Exposing the integrated relay/fusebox in the cargo compartment
Switch off the ignition.
Remove the left side panel in the cargo compartment.
Release the integrated relay/fusebox. Lift the catch by the upper edge and angle out the integrated relay/fusebox.