XC90 AWD L6-3.2L VIN 98 B6324S (2007)
-
Flip the anti-dazzle button toward the lens. Disconnect the connector in the control module by pressing the catch through the opening. Use a
screwdriver.
-
Remove the screw from the control module.
-
Remove the control module.
Check
Check that the control module connectors are intact.
Installing the control module
-
Screw the control module screw into place.
-
Connect the connector for the control module.
-
Reinstall the cover for the control module connector.
-
Connect the 2 connectors.
-
Press the bulb holder into place.
-
Install the ground lead.
-
Install the 2 screws at the front edge.
-
Install the lens.
Ordering software
Order applicable software. See: Testing and Inspection/Programming and Relearning
Finishing
Program in the data read off from the old control module.