XC90 AWD L6-3.2L VIN 98 B6324S (2007)
Take the connector and loosen the lock.
Install the cable ends' pins in the connector acc. to:
1. 1. Blue (BL)
2. 2. Green (GN)
3. 3. Violet (VO)
4. 4. Yellow (Y)
5. 5. White (W)
6. 6. Black (SB)
Press back the connector's catch.
Take the long cable from the kit and connect it to the connector which has just been prepared.
Guide the cable down between the carpet and the door sill as far as possible to the floor and route it along the right-hand side of the car on to the
rear edge of the right-hand rear door's opening.
Route the cable by the front right-hand seat mounting on the right-hand seat in the second row of seats.
Pull away the mat from the front edge of the right-hand side panel in the cargo compartment.
Route the cable harness along the right side of the right seat's placement in the second row of seats, towards the front edge of the rear wheel
Route it further on the left-hand side of the seat belt's lower mounting, between the support bracket for the right-hand seat and wheel housing, and