Volvo Workshop Manuals
XC90 AWD L6-3.2L VIN 98 B6324S (2007)
Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Braking Sensor/Switch > Component Information > Service and Repair > Pedal Position Sensor, Replacing > Page 3159
Note! Check that the snap ring is in position in the groove. Check that the ends of the snap ring lie against the stop lug.
The O-ring on the sensor
lubricate the O-ring lightly using a soap solution
the sensor for the power brake booster so that the locking lug goes into position.
Gently pull the sensor. Check that the sensor is secure.
|[PREV PAGE] [NEXT PAGE]|