XC90 AWD L6-3.2L VIN 98 B6324S (2007)
Hazard Warning Switch: Service and Repair
Switch hazard warning signal flasher, replacing
Note! As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information in the illustrations is always correct.
Remove the loudspeaker grille. Lift up the loudspeaker and/or the mounting for the display screen. See Display screen / loudspeaker, RTI (road traffic
information), replacing See: Accessories and Optional Equipment/Navigation System/Navigation Display/Service and Repair.
Press out the switch for the hazard warning signal flasher.
Disconnect the connector.
Connect the connector.
Press the switch for the hazard warning signal flasher into place.