XC90 AWD L6-3.2L VIN 98 B6324S (2007)
Headlamp Alignment Sensor: Testing and Inspection
Calibrating the position sensor for Bi-Xenon lamps
If the rear electronic module (REM) or position sensor for the Bi-Xenon lamps is replaced, the position sensor must be calibrated.
Note! If the vehicle is equipped with Four-C, calibration must be carried out via suspension module (SUM).
Someone must sit in the driver's seat during calibration. The person must weigh at least 75 kg. Ensure that the vehicle is unladen and is on a flat
Click on the VCT2000 symbol
Calibrate the position sensor.
Note! Diagnostic trouble code (DTC) REM-8F12 is stored when the rear electronic module (REM) is replaced by a new. After calibrating the
position sensor, erase the diagnostic trouble codes (DTCs) in the rear electronic module (REM).
Continue - DONE