XC90 AWD L6-3.2L VIN 98 B6324S (2007)
Impact Sensor: Service and Repair
Collision Sensor B and C-Post, Replacing
Collision sensor B and C-post, replacing
As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential
information in the illustrations is always correct.
Collision sensor B-post, replacing
Remove the battery lead. See Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.
Removing the collision sensor B-post
the B-post panel. See Panel B-post, replacing See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Panel B-Post,
the connector by pressing the catch and carefully pull downwards.
Note! Do not pull the wiring.