XC90 AWD L6-3.2L VIN 98 B6324S (2007)
Seat Belt Tension Sensor: Service and Repair
Force limiter mechanical/belt tension sensor, replacing
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
The driver's seat always has a mechanical force limiter.
The passenger seat always has a force limiter with a belt tension sensor.
Adjusting the seat position
Move the seat as far forward as possible.
Removing the force limiter/belt tension sensor
Remove the front seat side panel. See: Side panel front seat, replacing See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front
Seat, Driver's Seat, Front Seat/Side Panel Front Seat, Replacing.
Insert a screwdriver on the inside of the end mounting. Remove the seat belt by pressing the catch inwards and pulling upwards.