volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Removal and Replacement|Page 6263 > < Crankshaft Gear/Sprocket|Specifications
Page 1
background image

Timing Chain: Removal and Replacement

Camshaft chain, replacing

Special tools:

999 7196 Counterhold See: Tools and Equipment/999 7196 Counterhold 
999 7198 Press tool See: Tools and Equipment/999 7198 Press Tool 
999 5304 SEPARATOR See: Tools and Equipment/999 5304 Separator 
999 5716 Reading off tool See: Tools and Equipment/999 5716 Reading off Tool 
999 7070 Mounting See: Tools and Equipment/999 7070 Mounting 
999 5460 Lifting hook See: Tools and Equipment/999 5460 Lifting Hook 
999 7235 Position setter See: Tools and Equipment/999 7235 Position Setter 
999 7236 Position setter See: Tools and Equipment/999 7236 Position Setter 

Note! Since the illustrations in this service information are used for different model years and/or models. Some variation may occur. However,
the essential information in the illustrations is always correct.

Preparatory work

Disconnect the battery negative cable. See: Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery,
Disconnecting.
This work requires the car to be raised. See Jacking points, body See: Maintenance/Vehicle Lifting/Service and Repair.

Remove:

-

the valve covers. See: Valve cover/gasket, replacing, B8444S See: Cylinder Head Assembly/Valve Cover/Service and Repair 

-

the auxiliaries belt/tensioner acc. to: Auxiliaries belt/belt tensioner, replacement, B8444S See: Drive Belts, Mounts, Brackets and
Accessories/Drive Belt Tensioner/Service and Repair 

-

the right front wheel.

Removal

Removing vibration damper

Remove the protective cover, 2 x nuts.

Removal and Replacement|Page 6263 > < Crankshaft Gear/Sprocket|Specifications