XC90 AWD V8-4.4L VIN 85 B8444S (2005)
Use: 999 7193 Counterhold See: Tools and Equipment/999 7193 Counterhold Install the drive plate using the 1x screw. Tighten.
Finishing
Checking clearance
Use a feeler gauge. Check the clearance between the turntable and the pulley. Measure at several points around the turntable.
The clearance must be between 0.3 and 0.6 mm. Replace the shims if the clearance does not lie within the given values.
Installing the compressor
Install the compressor. See: Compressor, replacing, B8444S See: Service and Repair.
Check the function.