XC90 AWD V8-4.4L VIN 85 B8444S (2005)
Remove:
-
the connector
-
the pressure sensor.
Installation
Installing the pressure sensor
Install:
-
the pressure sensor.
-
the connector.
Finishing
Filling with coolant and leak tracing
Vacuum pump the air conditioning (A/C) system. See: Vacuum pumping See: Service and Repair/Vacuum Pumping.
Fill the system. See: Refrigerant, filling See: Service and Repair/Refrigerant, Filling.
Leak trace the system. See: Leak tracing, fluorescent tracing agent / UV lamp See: Testing and Inspection/Component Tests and General
Diagnostics/Leak Tracing, Fluorescent Tracing Agent/UV Lamp or: Leak tracing, electronic leak tracer See: Testing and Inspection/Component Tests
and General Diagnostics/Leak Tracing, Electronic Leak Tracer.
Installing the skid plate
Note! For tightening torques, see: See: Body and Frame/Specifications
Move the protective plate up in the bumper cover.
Press forward until the mounting brackets enter the subframe.
Install and tighten the 6 x M10 screws crosswise.