XC90 AWD V8-4.4L VIN 85 B8444S (2005)
-
Remove the screws for the rely/fuse holder. Push the lock at the front of the fusebox to one side. Lift the relay/fuse holder straight up
-
Disconnect the connectors
-
Remove the cable terminals for the main fuse.
Removing the main fuse
-
The main fuse is on the underneath of the relay/fuse holder
-
Release the relay/fuse holder. See Removing the integrated relay/fusebox. The connectors do not need to be disconnected
-
Remove the nuts for the main fuse
-
Replace the fuse
-
Install the nuts.
Removing the capacitor
-
The capacitor is at the bottom of the integrated relay/fusebox
-
Disconnect the cable terminals, making a note of their locations
-
Replace the capacitor
-
Connect the cable terminals, making a note of their locations.
Removing the bottom section