Volvo Workshop Manuals
XC90 AWD V8-4.4L VIN 85 B8444S (2005)
Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Body Control Module > Component Information > Service and Repair > Central Electrical Unit Engine Compartment > Page 1477
Hint: The rear panel in the side panel of the cargo compartment can be removed to change fuses.
Relay and fuse location, 11D
For the location of the relays and fuses, see: See: Power and Ground Distribution/Locations
1. Wiring diagram for relevant model year
Installing the integrated relay/fusebox in the cargo compartment
Align the integrated relay/fusebox in the grooves in the bracket and press into place.
Replacing the rear electronic module (REM)
The rear electronic module (REM) is a separate unit in the relay box in the cargo compartment.
Caution! New software can only be ordered when the control module is installed in the car. VIDA reads off the new control module identity
Release the relay and fuse box. See Exposing the integrated relay/fusebox in the cargo compartment.
Removing the control module
|[PREV PAGE] [NEXT PAGE]|