Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 AWD V8-4.4L VIN 85 B8444S (2005)

Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Braking Sensor/Switch > Component Information > Service and Repair > Pedal Position Sensor, Replacing > Page 2976

Page 2
background image

Disconnect the connector from the sensor.
Slacken off the snap ring around the mounting for the sensor slightly. Insert a narrow screwdriver or wedge. Press one end of the snap ring in
approximately 10 mm. Press radially backwards in the groove for the snap ring.
Remove the sensor and the O-ring.

Installation

Installing pedal position sensor

Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Braking Sensor/Switch > Component Information > Service and Repair > Pedal Position Sensor, Replacing > Page 2976

[PREV PAGE] [NEXT PAGE]