volvo Workshop Repair Guides

Volvo Workshop Manuals

[PREV PAGE] NEXT PAGE >
Page 1
background image

Wheel Speed Sensor: Service and Repair
Wheel Sensor Front, Replacing

Wheel sensor front, replacing

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.

Preparatory work

Raise the vehicle. Remove the front wheels.

Replacement

ABS sensor front, replacing

Note! The work must be carried out on both sides unless otherwise indicated in the heading.

Clean the sensor seat using a soft brush. Blow clean.

Remove:

-

the screw for the sensor

-

the cable from the brackets and the clip.

Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Wheel Speed Sensor > Component Information > Service and Repair > Pulse Wheel Drive Shaft, Replacing > Page 3040

[PREV PAGE] NEXT PAGE >