Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 AWD V8-4.4L VIN 85 B8444S (2005)

Sensors and Switches > Sensors and Switches - Engine > Oil Level Sensor > Component Information > Locations > Page 3339

Page 1
background image

Oil Level Sensor: Service and Repair

Oil level sensor, replacing

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.

Removal

Draining engine oil

Drain the oil from the engine. See Oil/oil filter, replacing, B8444S See: Engine, Cooling and Exhaust/Engine/Engine Lubrication/Oil Filter/Service and
Repair.

Removing the oil level sensor

Remove:

-

the connector from the oil level sensor

-

the 3 M6 screws

-

the oil level sensor.

Installation

Note! For tightening torques, see See: Engine, Cooling and Exhaust/Engine/Specifications/Mechanical Specifications/Tightening Torque

Installing the oil level sensor

Install:

-

the oil level sensor

-

the 3 M6 screws; tighten

-

the connector to the oil level sensor.

Finishing

Fill engine oil as specified: Oil/oil filter, replacing, B8444S See: Engine, Cooling and Exhaust/Engine/Engine Lubrication/Oil Filter/Service and Repair.
Warm up the engine. Check for any oil leaks.

Sensors and Switches > Sensors and Switches - Engine > Oil Level Sensor > Component Information > Locations > Page 3339

[PREV PAGE] [NEXT PAGE]