Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 AWD V8-4.4L VIN 85 B8444S (2005)

Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Coolant Temperature Sensor/Switch (For Computer) > Component Information > Locations > Page 3808

Page 6
background image

Install:

-

the air cleaner intake pipe

-

the 2 M6 screws; tighten.

Installation of upper engine cover over cylinder 1, 3, 5 and 7 (bank 1) 

Remove the oil filler cap.

Install:

-

upper engine cover over cylinder 1, 3, 5 and 7 (bank 1)

-

the oil filler cap.

Check

Caution! Make sure the outlet hose of filling equipment is not blocked as this could damage the cooling system.

Fill with coolant using filling equipment 951 2957 Coolant Reservoir See: Tools and Equipment/951 2957 Coolant Reservoir and cover 951 2953 Cover 
See: Tools and Equipment/951 2953 Cover.
Check the oil level in the engine and transmission. Start the engine and allow it to warm to normal operating temperature. Check for leaks and proper
function. Fill up fluids as necessary.

Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Coolant Temperature Sensor/Switch (For Computer) > Component Information > Locations > Page 3808

[PREV PAGE] [NEXT PAGE]