XC90 AWD V8-4.4L VIN 85 B8444S (2005)
-
the tie straps around the protective sheath, hoses and wiring
-
the net protective sheath by carefully threading it off the hoses and wiring
-
the tie strap under the protective sheath.
Remove:
-
the tie strap around the wiring above the pump
-
the level sensor by pressing in the two clips and pulling upwards
-
the thin pipe from the holder on the outside of the fuel tank unit
-
the wiring from the holder in the fuel tank unit.
Installing the right-hand level sensor
Install:
-
the new level sensor
-
the wiring in the holder
-
the thin pipe in the holder on the outside of the fuel tank unit
-
the tie strap around the wiring above the pump.
Install: