XC90 AWD V8-4.4L VIN 85 B8444S (2005)
Camshaft Position Sensor: Service and Repair
Intake Camshaft Position Sensor, Replacing
Intake camshaft position sensor, replacing
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Removal
Removing the fuel rail
Remove the fuel rail. See Valve cover/gasket, replacing, B8444S See: Engine, Cooling and Exhaust/Engine/Cylinder Head Assembly/Valve
Cover/Service and Repair.
Removing the intake camshaft position sensor
Remove:
-
the connector from the position sensor
-
the screw
-
the intake camshaft position sensor.
Installation
Note! For tightening torques, see: Tightening torque, B8444S See: Engine, Cooling and Exhaust/Engine/Specifications/Mechanical
Specifications/Tightening Torque.
Installing the intake camshaft position sensor