XC90 AWD V8-4.4L VIN 85 B8444S (2005)
the 2 screws
the collision sensor.
Installing the collision sensor in the B-post
the collision sensor
the 2 screws. Tighten. See
the B-post panel. See Panel B-post, replacing See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Panel B-Post,
Collision sensor C-post, replacing
Remove the battery lead. See Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.
Removing the collision sensor from the C-post
the side panel. See Side panel cargo compartment, replacement See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and