XC90 FWD L6-3.2L VIN 96 B6324S2 (2010)
Central Control Module: All Technical Service Bulletins
Instruments - Fuel Gauge Reads '0' With Fuel In Tank
Retailer Technical Journal 22294
Fuel level shows 0 even with fuel in tank
VIDA DTC information
If using a printed copy of this Retailer Technical Journal, first check for the latest online version.
The fuel gauge may intermittently show 0 in the DIM (Drivers Information Module). Customers may also report that the fuel level will show correctly
after a key cycle. The following DTCs (Diagnostic Trouble Codes) will be set with an intermittent status:
DIM 0001 Driving distance. Incorrect value
CEM 4A31 Ejector sensor. Faulty signal (ejector side) Only posted on cars with 2 sensors.
CEM 4A35 Fuel level sensor. Faulty signal (pump side)
PRODUCT MODIFICATION: The root cause has been found within the CEM (Central Electronics Module) software. The CEM looses the distance
information for 0.2 seconds and then goes back to its correct value. DTC CEM-4A35 and/or 4A31 will be set as a result of the CEM not being able to
see the fuel level drop during a set distance. This will cause CEM to send out a low quality value for the fuel level signal that the DIM cannot interpret.
New CEM software has been introduced for service and production for all affected vehicles at the chassis end limits above.