volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 2
background image

If the leak is confirmed to be coming from the rear differential housing halves, separate and reseal the rear differential housing according to the following
procedure in conjunction with the removal and replacement procedures in VIDA.

1. Note! Some variation in the illustrations may occur, but the essential information is always correct.

Final drive, removal

2. This method applies to all final drives with a 45° mating flange.

Remove the final drive from the vehicle according to VIDA:

INFORMATION

REPAIR

Removal, replacement and installation

Power transmission

Rear axle, drive shafts

Final drive

Drain the oil from the final drive.

General (applies to all models)

3. Warning! Use protective eyewear.

Clean the final drive using isoproponal PN 1161721 around the mating flange.

Blow clean with compressed air.

Remove:

- The screws, quantity (qty) 8 or 9, depending on model.

Final drive, cleaning

Transmission and Drivetrain > Differential Assembly > Differential Cover > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Differential Cover: > TJ22103 > Dec > 09 > Drivetrain - Rear Differential Leaking And Resealing > Page 2881

< PREV PAGE NEXT PAGE >