XC90 FWD L6-3.2L VIN 98 B6324S (2007)
-
Route the aerial cable down along the existing wiring at the rear edge of the side window down to the rear edge of the wheel arch
-
Clamp the aerial cable at the existing wiring using the tie straps from the kit.
Applies to cars with two rows of seats
-
Route the aerial cable on the right-hand side of the cargo floor support, inside the front edge of the floor carpet in the right-hand rear door opening.
Continue along the right-hand side of the car.
Applies to cars with three rows of seats
-
Insert a cable (1) at the rear edge of the right-hand side panel and along the inside of the panel, above the mountings for the load securing eyelets
and to the front edge of the side panel
-
Tape the end to the aerial cable (2) at the cable. Pull the cable with the aerial cable from the front edge of the side panel.