XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Keyless Entry Transmitter: Testing and Inspection
Ignition Key/Remote Control, Adding/Replacing/Erasing
Ignition key/Remote control, adding/replacing/erasing
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Ignition key/Remote control, adding/replacing/erasing
Caution! When replacing an ignition key or remote control, the new unit must be programmed. Both software and the code on the packaging
are required to add a new remote control. Only the software is required to erase a remote control. Only the software is required to add an
ignition key.
Ignition key programming/erasing
Order the software. See: Testing and Inspection/Programming and Relearning/Software Downloading
Remote control programming/erasing
Order the software. See: Testing and Inspection/Programming and Relearning/Software Downloading
Finishing
Check the function after programming an ignition key or remote control.
Model year 2004
Note! Year 2004 sees the introduction of an ignition key which is integrated with the remote control.
Removing keys from the remote control
Fold out the key and remove the battery cover.