XC90 FWD L6-3.2L VIN 98 B6324S (2007)
-
Install the screw from the kit and tighten it three turns.
-
Reinstall the four screws.
-
Tighten all screws.
Reinstall:
-
the control module with console
Note! The protruding section of the console for the control module must be located above the existing console.
-
the screws
-
the connectors.
-
Remove the existing screw clips.
-
Install the new larger screw clips. Centre them against the existing holes.
Reinstall:
-
the tunnel console with screws and connectors
-
the side panels.