volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 19756 > < Procedures|Page 19754
Page 12
background image

-

Lower the steering wheel to its lowest position and then move it rearward to its rearmost position.

-

Remove the two screws at the top edge of the combined instrument panel border.

-

Carefully use a weatherstrip tool to pry loose the rubber seal from the upper steering wheel cover. It is held in place with five clips.

-

Remove the border by carefully pulling it rearward - first at the bottom edge and then at the top edge - until all clips have released.

-

Remove the four screws for the combined instrument panel.

-

Pull out the combined instrument panel. Disconnect the connector on the reverse of the combined instrument panel.

Installing the antenna

-

Remove the antenna from the kit. Remove the clip.

Procedures|Page 19756 > < Procedures|Page 19754