XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Running board, Foot step
Note! During installation the underlying surface must be kept at a temperature of at least +15°C (59°F). Do not wash the car within 48 hours
after installation is completed. Allow the car to remain inside for at least two hours after installation is completed if outside temperature is less
than +15°C (59°F).
-
Wash the running board clean on the top and along the sides.
-
In addition, wash the adjacent surfaces on the lower section of the body if they are dirty.
-
Wipe dry.
