XC90 FWD L6-3.2L VIN 98 B6324S (2007)
-
the 4 screws
-
the bracket for the handle by pressing it forwards from the inside.
Installing the handle on the outer front side door (without deadlocking)
Note! For tightening torques, see Specifications See: Specifications.
Install:
-
the bracket for the handle
-
the 4 M5 screws. Tighten
-
the bracket on the outside of the door
-
the handle Press back the upper front link mounting so that the handle is secured
-
the links between the outer handle and the lock
-
the run-off profile
-
the door panel. See Panel front side door, replacing See: Front Door Panel/Service and Repair.
Handle, outer, front, side door (with deadlocking), replacing
Removing the exterior handle from the front side doors
Remove:
-
the door panel. See Panel front side door, replacing See: Front Door Panel/Service and Repair
-
the run-off profile
-
the window. See Window front side door, replace See: Front Door Window Glass/Service and Repair.
Detach the weatherstrip up to the door arch.
Drill out the rivets. See Removing rivet .
Remove the glass guide.