XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Move the vacuum pump to one side.
Remove:
-
the 2 screws for the latch
-
the latch.
Unhook the cable.
Note! Note the position of the lock cable.
Replace the lock.
Installing the hood release catch (left-hand side)
Note! For tightening torques, see See: Specifications
Angle in the hood catch together with the latch.
Secure the hood catch using the 2 M6 screws. Finger tighten.
Hint: Do not tighten the screws for the hood catch until the hood is closed (see the illustration).
Install:
-
the 2 M8 screws for the latch. Tighten
-
the vacuum pump
-
2 M6 nuts. Tighten
-
the air baffle
-
the 2 M6 screws. Tighten.