volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Bushing Sub-Frame, Replacing|Page 23210 > < Bushing Sub-Frame, Replacing|Page 23208
Page 6
background image

Removing the nuts and screw for the steering gear

Remove:
-

the four nuts and the screw holding the steering gear

-

the nut (A), holding the lower half of the collision protection system. (Applies only to right-hand drive cars).

Removing the delivery line for the steering gear

Remove the delivery line for the steering gear from the snap fastener on the sub-frame. Remove any fuel line to the engine block heater.

Lowering the sub-frame

Bushing Sub-Frame, Replacing|Page 23210 > < Bushing Sub-Frame, Replacing|Page 23208