XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Install the hydraulic tool and press sleeve as illustrated.
Press the bushings into the subframe, see the following illustration.
Note! Use any of tools 999 5575, 999 5576 and 951 2564.
Installing the wiring for the heated oxygen sensor (HO2S)
Lift up the sub-frame slightly (approximately 50 mm from the car body).
Install the bracket for the heated oxygen sensor (HO2S) on the subframe (does not apply to diesels).
Install the heated oxygen sensor (HO2S) wiring on the right hand side of the sub-frame (applies to 6- cylinder engines only).