XC90 FWD L6-3.2L VIN 98 B6324S (2007)
The problem may come from the connection between the subframe and the lower control arm rear bushing, and may be caused by incorrect torque in the
bolt and nut in this connection.
From chassis number 428201-, a new nut was introduced in production, and a higher torque was applied to the connection.
For vehicles within the chassis range above, if this bolt or nut are found to have an incorrect torque specification, or if they are found to be the source of
the noise or incorrect alignment, follow the Service procedure below.
Parts
Note!
Parts availability is very limited at this time. Please order parts only for vehicles scheduled for repair. Efforts are underway to improve availability as
quickly as possible.
Service
Replace bolt and nut with new parts. Tighten to 77 lb.-ft. (105 Nm) + 180 degrees.
Note!
Once this bolt is removed or becomes loose, it must always be replaced with a new bolt.
Warranty Claim Information