XC90 FWD L6-3.2L VIN 98 B6324S (2007)
INTRODUCTION
-
NOTE! Read through the whole installation instruction before starting the work.
-
The illustrations display the procedure in order of operation. The order of operation is repeated in the text section.
Cargo compartment wall
-
Before installing check the measurement at point A = 410 mm. Adjust as necessary.
-
Screw in the support plate (1).
-
Install the lower bracket (2) as illustrated.
-
Position the cargo compartment wall with the clamps into the car.
-
Open the upper clamp and affix it loosely on the top bar of the safety grille.
-
Open the lower clamp and affix it as illustrated. Tighten the clamps only exactly as much as necessary to grip the grille, do not tighten them yet.