XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Illustration B is for making holes on the right-hand side
-
Measure up for drilling holes for securing the net pocket
-
Drill out the holes. Use a 3 mm (1/8") diameter drill bit. Use a 10 mm (25/64") drill stop
-
Remove the swarf. Smooth out the hole edges if necessary.
-
Take two clips, two screws and the net pocket from the kit
-
Using the screws and clips, tighten the rear face of the net pocket in the newly drilled holes as illustrated.