XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Hint: If the distance between the two rails differs, secure the short mechanical cable in a power screwdriver and screw until the rails are equal.
Install:
-
the connector
-
the electric motor and the mechanical cables
-
the 2 M5 screws
-
the front seat. See: Front seat, replacing See: Service and Repair/Removal and Replacement/Front Seat, Driver's Seat, Front Seat/Front Seat,
Replacing.
Electric Motor Backrest Cushion, Replacing
Electric motor backrest cushion, replacing
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Removal
Removing the electric motor for the backrest cushion
Remove the front seat. See: Front seat, replacing See: Service and Repair/Removal and Replacement/Front Seat, Driver's Seat, Front Seat/Front Seat,
Replacing.
Detach and pull up the upholstery. See: Upholstery back rest, replacing, Executive See: Seat Cover/Service and Repair/Front Seat, Driver's Seat, Front
Seat/Upholstery Backrest, Replacing.
Remove the black protective pad from the reverse of the backrest cushion. It is secured by 4 clips.