XC90 FWD L6-3.2L VIN 98 B6324S (2007)
-
Lower the backrest and check if the pin slides back into the slot as indicated by the picture.
10.
Re-assembly
Assemble:
-
The cover on the inner side of the seat
-
The screw for the cover. Tighten.
-
The complete tunnel tray (only XC90)
-
The cover on the outer side of the seat.
-
The screw for the cover. Tighten.
-
The seat belt to the seat belt fitting.
Attention:
A clicking noise MUST be heard when the seat belt quick-fit connection is snapped in the connection. Check by pulling several times to be
sure that the seat belt is correctly assembled into the end connection.
Assemble: Side panel. Press the side panel down in the rear.
-
Screw at the front end on the inside of the side panel. Tighten.
-
Re-adjust the seat into "normal" operation position.
11.
Adjustment of passenger seat.
